Excellent Media Group Co. Ltd. E071107WL ユーザーズマニュアル
Figures and Quick Guide
Wireless Eyewear
User's Manual
TM
Ver.01 20. Oct 2007
1
2
3
1
2
3
4
5
6
7
8
9
What You Get
One Eyewear
One Transmitter
One Receiver
Two AV (Audio/Video) Cables
Two Power Adapters
This User's Manual
One Transmitter
One Receiver
Two AV (Audio/Video) Cables
Two Power Adapters
This User's Manual
1.Earphones
2.Battery
3.Screen
2.Battery
3.Screen
1.Connection jack of the Eyewear
2.Volume control
3.Power ON/OFF switch
4.Charger indicator LED
5.Transmitter / Charger
6.Battery compartment
7.DC in jcak
8.AV in jack
9.AV out jack
2.Volume control
3.Power ON/OFF switch
4.Charger indicator LED
5.Transmitter / Charger
6.Battery compartment
7.DC in jcak
8.AV in jack
9.AV out jack
1.Plug one end of the provided power adapter into a wall
outlet and the other end into the bottom of the Transmitter.
Note: Use the adapter labeled OUTPUT: 6V DC with the
Transmitter.
2.Slide the ON/OFF/ switch to the ON position.
outlet and the other end into the bottom of the Transmitter.
Note: Use the adapter labeled OUTPUT: 6V DC with the
Transmitter.
2.Slide the ON/OFF/ switch to the ON position.
Eyewear
Transmitter / Receiver
Power Supply
Transmitter
Receiver
Loding the batteries
Loding the batteries
Product Layout
2
1
3
POWER
OFF ON
A/V OUT
A/V IN
DC IN
1
2
3
How to charge
Troublesshooting
1.Open the battery compartment cover on the rear of the
Receiver.
2.Insert 3 AA-size rechargeable batteries (follow the plus
(+) and minus (-) signs on the diagram inside the battery
compartment).
3.Close the battery compartment cover, and make sure it is
locked securely.
Note 1: Never mix old batteries with new ones.
Note 2: Remove the batteries from the receiver if you do
not plan to use it for a prolonged period of time.
4.Slide the POWER switch to the ON position.
Receiver.
2.Insert 3 AA-size rechargeable batteries (follow the plus
(+) and minus (-) signs on the diagram inside the battery
compartment).
3.Close the battery compartment cover, and make sure it is
locked securely.
Note 1: Never mix old batteries with new ones.
Note 2: Remove the batteries from the receiver if you do
not plan to use it for a prolonged period of time.
4.Slide the POWER switch to the ON position.
1.Insert the Charger(Transmitter) adapter into the power
socket.
2.Connect the Charger adapter with the Charger(Transmitter).
3.Connect the Receiver to the Charger in the direction as
illustrated,and the Charger indicator will light red to
indicate that it is being charged. When the Charger indicator
lights red off, it indicates the battery is charged
completely.
3.When the battery is completely charged, you can remove
the Receiver from the Charger(Transmitter).
socket.
2.Connect the Charger adapter with the Charger(Transmitter).
3.Connect the Receiver to the Charger in the direction as
illustrated,and the Charger indicator will light red to
indicate that it is being charged. When the Charger indicator
lights red off, it indicates the battery is charged
completely.
3.When the battery is completely charged, you can remove
the Receiver from the Charger(Transmitter).
Connect the mini plug of the provided AV cables to the AV
jack on the rear of the transmitter; connect the other end of
the cable to the AV jacks of the AV component labeled
LINE OUT.
jack on the rear of the transmitter; connect the other end of
the cable to the AV jacks of the AV component labeled
LINE OUT.
If you are not getting any signal at all
Make sure the camera and the monitor are turned on.
Make sure the power plugs are pushed all the way in.
Make sure the power plugs are pushed all the way in.
Setting Up
the charger light
will stay red
will stay red
AV Sources
A/V OUT
A/V IN
DC IN
AV OUT
AV IN
TV
Transmitter
DIGITAL VISION
TM
If you are not getting any signal at all
Check that the transmitter and receiver are properly
connected to the AV components from which you want to
send/receive the AV signal.
Check the power ON/OFF switches on the transmitter and
receiver.
Check power switches on the remote TV and video source
(TV game, VCR, DVD player, satellite receiver, etc.).
Make sure power plugs are pushed all the way in.
Check all cable connections.
connected to the AV components from which you want to
send/receive the AV signal.
Check the power ON/OFF switches on the transmitter and
receiver.
Check power switches on the remote TV and video source
(TV game, VCR, DVD player, satellite receiver, etc.).
Make sure power plugs are pushed all the way in.
Check all cable connections.
If the signal is poor, or there is interference
Adjust the receiver by rotating orientations until you get
the best reception.
If there is a microwave oven in use in the path between the
transmitter and receiver, remove the microwave oven or
turn it off.
Make sure the transmitter and receiver are within range of
each other.
the best reception.
If there is a microwave oven in use in the path between the
transmitter and receiver, remove the microwave oven or
turn it off.
Make sure the transmitter and receiver are within range of
each other.
Care and Maintenance
Do not attempt to open the case. Non-expert handling of
the device may damage it.
Keep dry. Precipitation, humidity, and liquids, contain
minerals that will corrode electronic circuits.
Do not use or store in dusty, dirty areas. Moving parts
may be damaged.
Do not store in hot areas. High temperatures can shorten
the life of electronic devices and warp or melt certain
plastics.
Do not store in very cold areas. When the AV sender
warms up (to its normal temperature), moisture can form
inside the case, which may damage electronic circuit boards.
Do not drop, knock, or shake it. Rough handling can break
internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or strong
detergents when cleaning.
Operate this product using only the power supply included
with it or provided as an accessory.
Do not overload electrical outlets or extension cords as this
can result in fire or electric shock.
the device may damage it.
Keep dry. Precipitation, humidity, and liquids, contain
minerals that will corrode electronic circuits.
Do not use or store in dusty, dirty areas. Moving parts
may be damaged.
Do not store in hot areas. High temperatures can shorten
the life of electronic devices and warp or melt certain
plastics.
Do not store in very cold areas. When the AV sender
warms up (to its normal temperature), moisture can form
inside the case, which may damage electronic circuit boards.
Do not drop, knock, or shake it. Rough handling can break
internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or strong
detergents when cleaning.
Operate this product using only the power supply included
with it or provided as an accessory.
Do not overload electrical outlets or extension cords as this
can result in fire or electric shock.
Specifications
Safety Precautions
For customers in America
For customers in USA
The Eyewear complies with the FCC rules.
For customers in USA
The Eyewear complies with the FCC rules.
For customers in Canada
The Eyewear meets all requirements of the Canadian
Interface-Causing Euipment Regulations.
The Eyewear meets all requirements of the Canadian
Interface-Causing Euipment Regulations.
For customers in Europe
The Eyewear is registered as having a suitable level of
electromagnetic emission for home & office usage and can
be used in all area including residential areas.
The Eyewear is registered as having a suitable level of
electromagnetic emission for home & office usage and can
be used in all area including residential areas.
Eyewear
The next level of Entertainment !
Experience your movies and games in a new and exiting
way: Resolution: 230k pixels . Suitably for all usual video
and audio signal sources . Connectable to commercial play
consoles . Unimpaired playing by integrated headphones.
The next level of Entertainment !
Experience your movies and games in a new and exiting
way: Resolution: 230k pixels . Suitably for all usual video
and audio signal sources . Connectable to commercial play
consoles . Unimpaired playing by integrated headphones.
Technical Data
Aspect ratio 4:3
Resolution 320x240
Contrast ratio 200:1
Viewing angle 25 (diagonal)
Image size 50" at 2,5m
Video system NTSC / PAL / SECAM
Power adapter 6V / 800mA
Power consumption Max. 350mA
Aspect ratio 4:3
Resolution 320x240
Contrast ratio 200:1
Viewing angle 25 (diagonal)
Image size 50" at 2,5m
Video system NTSC / PAL / SECAM
Power adapter 6V / 800mA
Power consumption Max. 350mA
Transmitter / Receiver
AV Transmit Frequency 920 MHz
AV Signal Range 10 meters (30 feet) clear line of sight
Antenna Built-in omni-directional antenna
A/V mod/demod. method FM
Audio Stereo audio input and output
Video Composite video input and output
Dimensions 8.8 (W) x 4.6 (H) x 11.0 (D) cm
for transmitter
5.9 (W) x 10.9 (H) x 3.9 (D) cm
for receiver
Weight 85.3g / 94g transmitter/receiver
Power DC 6V, 800mA for transmitter
DC 6V, 800mA or 3 AA rechargeable
for receiver
Operating temperature 0
AV Signal Range 10 meters (30 feet) clear line of sight
Antenna Built-in omni-directional antenna
A/V mod/demod. method FM
Audio Stereo audio input and output
Video Composite video input and output
Dimensions 8.8 (W) x 4.6 (H) x 11.0 (D) cm
for transmitter
5.9 (W) x 10.9 (H) x 3.9 (D) cm
for receiver
Weight 85.3g / 94g transmitter/receiver
Power DC 6V, 800mA for transmitter
DC 6V, 800mA or 3 AA rechargeable
for receiver
Operating temperature 0
~ 40
(32
~ 104
)
Specifications subject to change without notice