IDP Corp. Ltd. SMARTDUAL ユーザーズマニュアル
XXG
2.1.5. Insert the supply side of the ribbon to no.1 hole and press the opposite
(no.2) until it clicks. Insert the take-up side of the ribbon same method
to no.3 and no.4. And fasten the ribbon.
to no.3 and no.4. And fasten the ribbon.
(Caution! If the ribbon is not fastened, a rolling up error might happen.)
2.1.6. Install the disposable cleaning
roller to the ribbon cartridge.
2.1.7. Peel the protective wrapper from the cleaning roller.
To avoid contamination, always hold the cleaning roller. Be careful of touching, dust and
contamination because it is adhesive.
contamination because it is adhesive.
(Caution! Do not use without peeling off
the protective wrapper.
The cleaning roller do not perform its
function.)
function.)
ᶤ
<Figure 8> Install the ribbon
<Figure 10> Peel the protective wrapper
1
2
3
4
<Figure 9> Install the cleaning roller