IDP Corp. Ltd. SMARTDUAL ユーザーズマニュアル
XZG
2.2.3. Hold the cards by sides like
picture
(Caution! Do not bend the cards and
do not touch the surface of the cards)
do not touch the surface of the cards)
2.2.4. Push the stack back and forth to an angle of about 45° vertically.
(Note : Static charge makes cards stuck with significant adhesive force. These cards
must be physically separated from each other before inserted into the feeder.
If not separated, feeding or printing problems may occur.)
must be physically separated from each other before inserted into the feeder.
If not separated, feeding or printing problems may occur.)
2.2.5. Restore the card stack to its
original condition.
2.2.6. Place the card to the input hopper and close the hopper cover.
<Figure 14> Holding the cards
<Figure 15> Push the stack back and forth
<Figure 16> Restore the card stack
<Figure 17> Placing the cards and close the hopper cover