Autel Intelligent Tech. Corp. Ltd. MAXISYSMS906BT ユーザーズマニュアル
TPMS Service Operations
Programming Operations
63
To copy by OBD
1.
After performing
Read IDs from Vehicle in Relearn function,
OBD marks with the sensor IDs will appear on the table in
Programming screen.
Programming screen.
2.
Select the specific wheel on the screen, and then tap
Copy by
OBD button.
3.
Place the proper MX-Sensor near the top right of the Display
Tablet, and tap
Tablet, and tap
OK to start programming the saved sensor
information to the MX-Sensor.
4.
The programmed sensor ID will appear on Column 2 of the table.
NOTE: If you have performed both Check and Read IDs from Vehicle
functions, you can select either
functions, you can select either
Copy by Activation or Copy by OBD to
program the retrieved sensor ID to the MX-Sensor.
5.3.3 Auto Create
This function is designed to program the MX-Sensor by applying random IDs
created according to the test vehicle, when it is unable to obtain the original
sensor ID.
created according to the test vehicle, when it is unable to obtain the original
sensor ID.
To Auto Create
1. Tap
Programming tab.
2. Select the specific wheel on the screen.
3. Tap the
Auto Create functional button on the screen.
4. A message with sensor ID will prompt. Place the proper MX-Sensor near
the top right of the Display Tablet and tap
OK to write the new created
sensor ID into the MX-Sensor.
After programming is finished, the new programmed MX-Sensor ID will
display on Column 2 of the table.
NOTE: For some models, it is necessary to perform Relearn procedure after
installing the new MX-Sensor programmed by the way of Auto Create.
installing the new MX-Sensor programmed by the way of Auto Create.