Autel Intelligent Tech. Corp. Ltd. MAXISYSMS906BT ユーザーズマニュアル
TPMS Service Operations
Programming Operations
64
5.3.4 Manual Create
This function allows you to manually enter sensor IDs. You can enter a random
ID or the original sensor ID.
ID or the original sensor ID.
NOTE: Do not enter the same ID for different sensors.
To manual create
1. Tap the
Programming tab.
2. Select the specific wheel on the screen.
3. Tap
Manual Create button.
4. Enter the characters in the prompted screen. Tap
Done to finish and save
the sensor ID, or
No to exit.
NOTE: Sensors from different manufacturers may have different ID character
length limits. The Display Tablet will automatically recognize character length
of the OEM sensor ID, and prevent further input into the textbox when the
limit is reached.
of the OEM sensor ID, and prevent further input into the textbox when the
limit is reached.
5. Place the proper MX-Sensor near the top right of the Display Tablet and
tap
OK to start programming.
NOTE: For some models, if a random ID is entered, please perform Relearn
function after programming is finished; if the original sensor ID is entered,
there is no need to perform Relearn function.
there is no need to perform Relearn function.
5.4 Relearn Operations
This function allows
quick access to the vehicle’s ECU, performing TPMS
diagnostics, reading IDs from vehicle, writing IDs to the vehicle and reading/
clearing codes of tire pressure monitoring system.
clearing codes of tire pressure monitoring system.