Autel Intelligent Tech. Corp. Ltd. MAXISYSMY908 ユーザーズマニュアル
General Introduction
Accessory Kit
11
2.4 Accessory Kit
2.4.1 Main Cable
The VCI device can be powered through the Main Cable when connected to
an OBD II/EOBD compliant vehicle. The Main Cable connects the VCI device
to the vehicle
an OBD II/EOBD compliant vehicle. The Main Cable connects the VCI device
to the vehicle
’s data link connector (DLC), through which the VCI device can
transmit vehicle data to the MaxiSys display tablet.
Figure 2-7 Main Cable
– 1.5 m in length
2.4.2 OBD I Adapters
The OBD I adapters are for Non-OBD II vehicles. The adapter used depends
on the type of vehicle make being tested. The most common adapters are
shown below.
on the type of vehicle make being tested. The most common adapters are
shown below.
Benz-14
Chrysler-16
BMW-20
Kia-20
Nissan-14
GM/Daewoo-12
Honda-3
Fiat-3