Ablecom Technology Inc. HE130S2 ユーザーズマニュアル
13
Step4. Connecting to the Network
Connect a DSL modem and Media Server with
Ethernet cable (as below).
Ethernet cable (as below).
(Please see
Page 33 for
Network setup
)
Step5. Connecting to the Power
Cord
Connect the supplied power cord to AC-IN
terminal of the server. Then plug the server and
TV or Monitor Power Cord into the AC outlet.
terminal of the server. Then plug the server and
TV or Monitor Power Cord into the AC outlet.
Note:
The power cord type will be different as different
country, please check the power cord type with your
local dealer if the supplied power cord is not
correct.
local dealer if the supplied power cord is not
correct.
Step6. Connecting to the Speaker
(If your TV or Monitor is
without Speaker)
without Speaker)
Connecting the Speaker with audio cable as
below:
below:
Step7. Checking HDD
HE130S2 has two 2.5” hard disk drivers with
hot swap function. Please check if the system is
installed one HDD at least on the HDD_0
position.
hot swap function. Please check if the system is
installed one HDD at least on the HDD_0
position.
(Please see Page 14 for
detail instruction of Hot
Swap HDD Cage
)