Ablecom Technology Inc. HE130S2 ユーザーズマニュアル

15

 

This system supports two 2.5” hard disk drives, 
and you can add hard disk drives to expand 
your storage size as you need. Also, you can use 
these two drives to make RAID configuration or 
hot-swap hard disk drives while the system is 
operating. Please follow the instructions to 
setup your hard disk drives: 

Step1. Push the blue clip to 

release the drive to 
eject the installed 
hard disk drive 
cage. 

 

Step2. Hold the black bar 

to pull the hard disk 
drive out from the 
tray. 

 

Step3. You can follow the similar way to add or 

remove hard disk drives. When you add 
or replace a hard 
disk drive, do the 
following steps 
to fix the drives. 

 

Step4. Push the hard disk 

drive back into the 
ray, press and hold 
the blue clip. 

 

Step5. Push the black bar 

back to the position, 
then release the blue 
clip to fix the hard disk drive. 

Step1. Press power button to turn on the server. 

Step2. Place the disc into the slot-in optical 

drive, then the disc will be loaded 
automatically. 

 

 

Step1. Press the eject button to release disc. 

Step2. Remove the disc from the optical drive. 

 

 

Step1. Make sure your system if off. 

Step2. Locate the manual ejecting hole as 

shown in the images below.