Zhongshan City Richsound Electronic Industrial Ltd. SSB-3WB ユーザーズマニュアル

b)  Connect Audio L-R output of the AV  

  equipment to the LINE IN or RCA input  

  onto the unit.

You can listen to the TV program sound 

from connecting to the unit via LINE-IN 

cable as shown previously 

on page 8.

Using Line-IN socket
You can listen to the sound of the TV pro-

gram by connecting to the unit via LINE-IN 

cable. 

You can also connect to your PC with 

LINE-IN cable in the setup shown below.  

3&

HEADPHONE

VGA OUT

VGA IN

(Cable not supplied)

Connect to an External Audio Device
You can connect to your audio devices, 

e.g. CD player, to enjoy purely music, via 

the following conections.

(Cable not supplied)

 

Auto-on/off function is applied in this unit. 

Auto-off is to facilitate people not to con-

trol the unit when no sound is playing in few 

minutes. And when there are sounds input 

again, the unit will switch on automatically 

after few seconds. 

Warning:
If the volume of the TV or an external 

device via RCA or LINE IN is too low, the 

auto-off function will be triggered. When 

this situation happened for 2.5 minutes, LED 

VRXUFHOLJKWZLOOÁDVKVORZO\RQWKHXQLWIRU
the next 30 seconds and the unit will switch 

to standby mode.

Please turn up the volume of the input 

source (not the unit, but, e.g. TV or MP3 

player, etc.) slowly, until it returns to normal 

mode.

To avoid the auto-off being triggered 

unintentionally, pre-set the source volume 

higher and adjust the unit volume to a 

comfortable level.

Note: 
You might hear the sound over-lapping from 

both the TV and the unit while following 

some of the suggestion connections. To 

avoid this, turn the volume of TV down to 0 

or mute it.