Zhongshan City Richsound Electronic Industrial Ltd. SSB-3WB ユーザーズマニュアル
7
Prepare the Smart Remote Control
The Smart Remote Control provided allows
the unit to be operated from a distance.
z
Even if the Smart Remote Control is
operated within the effective range
(6m), remote control operation may
be impossible if there are any obstacles
between the unit and the remote control.
z
If the Smart Remote Control is operated
near other products which generate
infrared rays, or if other remote control
devices using infrared rays are used
near the unit, it may operate incorrectly.
Conversely, the other products may
operate incorrectly.
For First-time use:
The unit has a pre-in-
For First-time use:
The unit has a pre-in-
stalled lithium CR2025
battery. Remove the
protective tab to acti-
vate the remote control
battery.
To Replace the Smart Remote Control Battery:
$ 3UHVVGRZQWKHÁLSRQWKHOHIW
(B) : Pull out the battery tray and remove
(B) : Pull out the battery tray and remove
the old battery.
(C) : Place a new CR2025 battery into the
battery tray with correct polarity (+/-)
as indicated.
(D) : Insert the tray back into the slot.
Precautions Concerning Batteries
z
When the Smart Remote Control is not
to be used for a long time (more than a
month), remove the battery from the
Smart Remote Control to prevent it from
leaking.
z
If the batteries leak, wipe away the
leakage inside the battery compartment
and replace the batteries with new ones.
z
Do not use any batteries other than
WKRVHVSHFLÀHG
z
Do not heat or disassemble batteries.
1HYHUWKURZWKHPLQÀUHRUZDWHU
z
Do not carry or store batteries with other
metallic objects. Doing so could cause
batteries to short circuit, leak or explode.
z
Never recharge a battery unless it is
FRQÀUPHGWREHDUHFKDUJHDEOHW\SH
WARNING:
The batteries (battery pack or
batteries installed) shall not be exposed to
H[FHVVLYHKHDWVXFKDVVXQVKLQHÀUHRUWKH
like.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause
undesired operation of the device.
Shielded cables must be used with this unit to
ensure compliance with the Class B FCC limits.
Model No: SSB-3WB with certification/registration
number IC : 11096A-SSB3W
Getting Started