Zhongshan City Richsound Electronic Industrial Ltd. SSB-3WB ユーザーズマニュアル
12
Program Smart Remote Control to
Control TV
Control TV
You can store a total of up to seven of your
most frequently used TV functions in the TV
learning zone of the Smart Remote Control.
This feature enables you to use only one
remote control to operate the unit togeth-
er with your TV.
The remote control codes of a TV are stored
in the Smart Remote Control. The available
preset buttons are ON/OFF , FUNCTION
preset buttons are ON/OFF , FUNCTION
, ENTER, TV VOL+/VOL-, TV CH+/CH-.
NOTE:
During the learning process, the normal
During the learning process, the normal
remote control functions are disabled.
1 Place the Smart Remote Control (A)
within a 5mm-50mm distance from the
TV remote control (B), pointer to pointer
as shown above.
2 Press and hold the LEARN button for 2
seconds to activate the learning mode.
A red indicator on the Smart Remote
Control (A) will light up.
3 Press one of the TV learning zone buttons
on the Smart Remote Control (A), the
UHGLQGLFDWRUÁDVKHV
4 Press the button on the TV remote
4 Press the button on the TV remote
control (B) that is to be stored on the
Smart Remote Control (A). When the
code is received successfully, the red
LQGLFDWRUZLOOTXLFNO\ÁDVKIRUWLPHV,I
the code is not successfully received,
the code is not successfully received,
WKHUHGLQGLFDWRUZLOONHHSRQÁDVKLQJ
5 Repeat steps 3-4 to program more
5 Repeat steps 3-4 to program more
functions onto the Smart Remote Control
(A).
6 Press the LEARN button to save the
setting and to exit the learning mode.
Red indicator will turn off immediately.
Basic Operation