MitraStar Technology Corporation DSL2401HNAT1CC ユーザーズマニュアル

Chapter 23    Remote Management

134

You can use Telnet to access the Device’s command line interface. Specify which interfaces allow 

Telnet access and from which IP address the access can come.

Click Maintenance > Remote MGMT > Telnet tab to display the screen as shown. 

Figure 97 Maintenance > Remote MGMT > Telnet

Table 81   Maintenance > Remote MGMT > Telnet 

Server Port

This displays the service port number for accessing the Router. If the number is grayed 

out, it is not editable.

Server Access

Select the interfaces through which a computer may access the Router using this 

service.

Note: It is recommended if you are allowing WAN access even temporarily to change 

the default password (in Maintenance > User Account). To allow access from 

the WAN, you will need to configure a WAN to Router firewall rule. 

Secured Client IP 

Address

A secured client is a “trusted” computer that is allowed to communicate with the 

Router using this service. 
Select All to allow any computer to access the Router using this service.
Choose Range to just allow the computers with an IP address in the range that you 

specify to access the Router using this service.

You can use FTP (File Transfer Protocol) to upload and download the Router’s firmware and 

configuration files. To use this feature, your computer must have an FTP client.