MitraStar Technology Corporation DSL2401HNAT1CC ユーザーズマニュアル

Chapter 23    Remote Management

136

To change your Router’s SNMP settings, click Maintenance > Remote MGMT > SNMP tab. The 

screen appears as shown.

Figure 99 Maintenance > Remote MGMT > SNMP

 

Table 83   Maintenance > Remote MGMT > SNMP 

Server Port

This displays the port the SNMP agent listens on. If the number is grayed out, it is not 

editable.

Server Access 

Select the interfaces through which a computer may access the Router using this 

service.

SNMPv3

Select Enable to activate the SNMPv3 feature.

Secured Client IP 

Address

A secured client is a “trusted” computer that is allowed to access the SNMP agent on the 

Router.
Select All to allow any computer to access the SNMP agent.
Choose Range to just allow the computers with an IP address in the range that you 

specify to access the Router using this service.