MitraStar Technology Corporation DSL2401HNAT1CC ユーザーズマニュアル

Chapter 9    Network Address Translation (NAT)

74

Click Network Setting > NAT to open the Port Forwarding screen.

Figure 51 Network Setting > NAT > Port Forwarding

 

Table 43   Network Setting > NAT > Port Forwarding 

WAN Interface

Select the WAN interface for which to configure NAT port forwarding rules.

Add new rule

Click this to add a new port forwarding rule.

Active

This field indicates whether the rule is active or not.
A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not 

active.

Service Name

This is the service’s name. This shows User Defined if you manually added a service. 

You can change this by clicking the edit icon.

External Start/End 

Port 

This is the first/last external port number that identifies a service.

Internal Start/End 

Port

This is the first/last internal port number that identifies a service.

Server IP Address

This is the server’s IP address.

Modify

Click the Edit icon to edit the port forwarding rule.
Click the Delete icon to delete an existing port forwarding rule. Note that subsequent 

address mapping rules move up by one when you take this action.

Current UPNP 

Rule Listing

Universal Plug and Play (UPnP) is a distributed, open networking standard that uses 

TCP/IP for simple peer-to-peer network connectivity between devices. A UPnP device 

can dynamically join a network, obtain an IP address, convey its capabilities and learn 

about other devices on the network. In turn, a device can leave a network smoothly 

and automatically when it is no longer in use.
These are the rules the Router has created using UPnP.

External Port

This is the external port number that identifies a service.