MitraStar Technology Corporation DSL2401HNAT1CC ユーザーズマニュアル

Chapter 9    Network Address Translation (NAT)

75

This screen lets you create or edit a port forwarding rule. Click Add new rule in the Port 

Forwarding screen or the Edit icon next to an existing rule.

Figure 52 NAT > Port Forwarding: Add/Edit 

 

Internal Port

This is the internal port number that identifies a service.

Client IP

This is the IP address of the device for which the Router created the UPnP rule. 

Protocol

This is the protocol of the traffic for which the Router created the UPnP rule. 

Table 43   Network Setting > NAT > Port Forwarding (continued)

Table 44   NAT > Port Forwarding: Add/Edit 

Active

Select or clear this field to turn the port forwarding rule on or off.

Service Name

Select a service to forward or select User Defined and enter a name in the field to the 

right. 

External Start 

Port

Configure this for a user-defined entry. Enter the original destination port for the 

packets.
To forward only one port, enter the port number again in the External End Port field. 
To forward a series of ports, enter the start port number here and the end port number 

in the External End Port field.