AMBER Wireless GmbH F162000010 ユーザーズマニュアル

4 Start-up

 | 

4.1 Start-up

An increase in operating temperature due to poor ventilation can lead to malfunc-

tion or failure.

▶ Do not set up near to a heat source.

▶ Do not cover the product's vents. A minimum gap of 50 mm must be left in front

of and behind the unit.

▶ Operate the product only when it is horizontal.

▶ Connect theERGOcom 3 to a properly earthed power source that is protected by

a fuse.

Here, up to 38 channels can be set. A channel determines the assignment of a

specific ERGOremote to a specific ERGOcom 3.

Here, it is expedient to select a channel corresponding to the treatment room: e.g.

channel 1 is used for treatment room 1.

▶ Hold down the Channel Selection / Learn Channel Mode button for < 2 seconds.

The channel selected appears on the status display.

If there is no input for 8 seconds, the ERGOcom 3 switches back to operational

mode.

20/56