AMBER Wireless GmbH F162000010 ユーザーズマニュアル

4 Start-up

 | 

4.1 Start-up

▶ Select the required channel using navigation.

If there is no input for 8 seconds, the ERGOcom 3 switches back to operational

mode.

This saves the last setting on the status display.

The ERGOremote 's radio code is synchronised with the channel configured

onERGOcom 3 .

▶ Hold down the Channel Selection button on ERGOcom 3 for more than 2 se-

conds.

Learn Channel Mode appears on the status display.

If the channels do not synchronise within approx. 30 seconds, ERGOcom 3 swit-

ches back to operational mode.

▶ Hold down the Wake Up/Learn button on the ERGOremote for more than 3 se-

conds.

The green LED will be lit for 3 seconds to show that synchronisation is complete.

The green LED will flash to indicate that radio communication has not been set up.

TheERGOcom 3 with a display interface (equivalent to comfort or excellence level)

has a built-in USB 2.0 drive. This drive shares volatile and non-volatile memory.

The non-volatile memory then retains the information when the ERGOcom 3 is

switched off. The logos are stored here automatically.

The images are automatically stored in the volatile memory. When the
ERGOcom 3

 is switched off, these images are deleted.

The images contain the following name syntax: Bildxx_y.bmp.

21/56