Navico Inc. HS35 ユーザーズマニュアル
3-3-2 Edit or delete an entry
MENU SELECT
WAYPOINT
BACKLIGHT
►BUDDY LIST
LOCAL/DIST
▼
BUDDY LIST
►MANUAL NEW
SEA ROSE
MERMAID IV
BUDDY LIST
MANUAL NEW
►SEA ROSE
MERMAID IV
SEA ROSE
►EDIT
DELETE
EDIT NAME
SEA ROSE
EDIT MMSI
123456789
EDIT NAME
SEA ROSE 2
EDIT MMSI
122256798
SEA ROSE 2
122256798
►STORE
CANCEL
1.
Select BUDDY LIST. The cursor is at MANUAL NEW.
2.
Scroll down to the incorrect entry and press ENT.
3.
To delete the buddy, select DELETE then YES. The buddy is deleted immediately and the
buddy list is displayed again.
buddy list is displayed again.
4.
To edit the buddy, select EDIT. The cursor is at the first character of the name. Edit the
buddy name or to edit only the MMSI, press ENT repeatedly until the cursor moves to
the MMSI line.
5.
When you are finished, press ENT (repeatedly if necessary) until an updated screen
appears.
6.
Press ENT to store the changes. The buddy list is displayed again. If more changes are
required, repeat steps 2 through 6. Otherwise, press EXIT to ESC.
3-4 Local or distance sensitivity (LOCAL/DIST)
Use LOCAL/DIST to improve the sensitivity of the receiver either locally (LOCAL) or over
distances (DIST). LOCAL is not recommended for use in open sea conditions. It is designed for
use in areas of high radio noise; for example, close to cities.
distances (DIST). LOCAL is not recommended for use in open sea conditions. It is designed for
use in areas of high radio noise; for example, close to cities.
See also SQL (Squelch Control) in section 2.
3-4-1 Set distance sensitivity
MENU SELECT
BACKLIGHT
▲
BUDDY LIST
►LOCAL/DIST
CONTRAST
▼
SENSITIVITY
►DISTANT
LOCAL
1.
Select LOCAL/DIST then select DISTANT.
2.
Press ENT to activate the DIST setting. This disables local sensitivity and the menu is
displayed again.
3-3 Maintain your buddy list (BUDDY LIST)
Use the buddy list to store the names and associated MMSIs of 20 favorite people. Names are
stored in the order of entry, with the most recent entry shown first.
stored in the order of entry, with the most recent entry shown first.
The following sections show how to add, edit and delete entries on your BUDDY LIST.
Section 7-3 explains how to call a buddy.
3-3-1 Add an entry
You can enter a maximum of 20 buddy names. When your BUDDY LIST is full, you cannot
make a new entry until you have deleted an existing entry.
make a new entry until you have deleted an existing entry.
Each buddy name can have a maximum of 11 alphanumeric characters.
MENU SELECT
WAYPOINT
BACKLIGHT
►BUDDY LIST
LOCAL/DIST
▼
BUDDY LIST
►MANUAL NEW
SEA ROSE
MERMAID IV
ENTER NAME
ENTER MMSI
ENTER NAME
STARFISH
ENTER MMSI
ENTER NAME
STARFISH
ENTER MMSI
123456789
STARFISH2
123456789
►STORE
CANCEL
BUDDY LIST
►MANUAL NEW
STARFISH
SEA ROSE
MERMAID IV
1.
Select BUDDY LIST. The cursor is at MANUAL NEW. Press ENT.
2.
Enter the buddy name, one character at a time (this may be alphanumeric) then press
ENT repeatedly until the cursor moves to the MMSI entry line.
3.
Enter the MMSI associated with that buddy name (this must be numeric) then press
ENT.
4.
The new buddy name and MMSI are displayed. Press ENT to store the new entry, which
is displayed at the top of your buddy list.
Note: When the BUDDY LIST is full (20 entries), you can make a new entry and the buddy at
the end of the list is automatically erased.
Simrad - RS35 Operation Instructions
Simrad - RS35 Operation Instructions
23
22