Navico Inc. HS35 ユーザーズマニュアル

Note: this function is available only if an operational GPS receiver is not connected. 

MENU SELECT

 LOCAL/DIST

 CONTRAST

►GPS/DATA

 RADIO SETU

GPS/DATA

►MANUAL

 SETTING

MANUAL LL

.

N

.

W

MAN --:--UTC

14:38 UTC
M17 32.233 S
160 45.651 E

1. 

Select GPS/DATA then MANUAL. 

2. 

Enter the latitude, then the longitude, then the UTC. 

3. 

Press ENT when all the information is correct. 
The vessel’s latitude and longitude are shown on the screen, with the UTC time. The 
prefix M indicates a manual entry. The manual entries are cancelled if a real GPS position 
is received.

Note: a warning will be displayed after 4 hours to remind you that the current position 
information is manually entered.

If your position and time data are being updated through a GPS navigation receiver, you can 
enter the time difference between UTC and local time and display your local time on the LCD. 

MENU SELECT

 LOCAL/DIST

▲

 CONTRAST

►GPS/DATA

 RADIO SETU

▼

GPS/DATA

 MANUAL

►SETTING

SETTING

►TIME OFFSET

 TIME FORMAT

 TIME DISPLY

 LL DISPLY 

▼

TIME OFFSET

 +00.00

04:43 UTC

TIME OFFSET

 +03.00

07:43 LOC

07:50AM LOC
17 36.233 N
161 05.651 E

1. 

Work out the time difference between UTC and your local time (from the following 

graphic).

2. 

Select GPS/DATA then SETTING.

3. 

Select TIME OFFSET to enter the difference between UTC and local time. Use the 
Channel Select knob or + or – to change the time. Half hour increments can be used 
with a maximum offset of ±13 hours.

4. 

Press ENT when the local time is correct.
LOC is displayed after the time on the LCD as a reminder that local time is selected.

MENU SELECT

 BACKLIGHT 

▲

 BUDDY LIST

►LOCAL/DIST

 CONTRAST  

▼

SENSITIVITY

 DISTANT

►LOCAL

1. 

Select LOCAL/DIST then scroll to LOCAL.

2. 

Press ENT to activate the LOCAL setting. This disables distance sensitivity and the menu 

is displayed again. 

 LOCAL

 is displayed on the LCD as a reminder that sensitivity is reduced.

There are 8 levels of contrast.

MENU SELECT

 BUDDY LIST

▲

 LOCAL/DIST

►CONTRAST

 GPS/DATA  

▼

CONTRAST

  

  LO    HI

PRESS ENT

1. 

Select CONTRAST. 

2. 

Select a comfortable contrast level using the Channel Select knob or + or – on the 

microphone to change the setting. 

3. 

Press ENT to enable the setting and return to the menu. 

If the boat has an operational GPS navigation receiver and is connected by NMEA port, the 
VHF radio automatically detects and updates the vessel position and the local time. 

However, if the GPS navigation receiver is disconnected or absent, you can specify the vessel 
position and the local time manually, using the GPS/DATA option.

This information is important because it will be used if a DSC distress call is transmitted.

•  If GPS data is NOT available for some reason, the NO GPS alert will sound for 5 seconds (or 

until you press any key) and the radio requests you to enter the position data manually. 

•  This request is repeated every 4 hours if you do not enter the position data manually. 

After you have entered the position data manually, you must update it within 23.5 hours 

otherwise the NO GPS alert sequence repeats.

•  The NO GPS warning will be shown whenever GPS data is not available from an operational 

GPS navigation receiver.  

Simrad - RS35 Operation Instructions

Simrad - RS35 Operation Instructions

25

24