Trackcom Limited DPU-4500 ユーザーズマニュアル
7
Table 1 Technical data
Dimensions:
59 x 27 x 111 (W x H x D)
Weight: 266
g
Power supply:
12 to 24 V DC (± 10%)
Current:
Peak current
<2A
Av. Current (moving data logging &
rolling loop)
rolling loop)
<500mA
Av. Current (ignition off & out of
GSM/GPS service)
GSM/GPS service)
<50mA
Av. Current (ignition off & in GSM/GPS
service)
<20mA
Temperature range: Storage
-20 to +70 C
Operating
-20 to + 60 C
Charging
0 to 40 C
Interface 1:
GSM Antenna 50 ohm SMA
female, 900MHZ - 1800MHz
– 1900 MHz
female, 900MHZ - 1800MHz
– 1900 MHz
Interface 2:
Power / AUX 15 pin D-sub
male
male
Interface 3:
GPS Antenna 50 ohm SMC
male, 1.57542 GHz + 10 MHz
male, 1.57542 GHz + 10 MHz
Internal SIM Interface:
small size SIM 3 or 5 Volt
The DPU 4500 compatible with two variants of software, these being:
- InfoTrack Professional - is a professional fleet system, which enables real time
live tracking and allows journey data to be recorded and stored in the DPU V2.0
for remote downloading.
- InfoTrack Live Track - is a live tracking only system allowing real time tracking
only.
1.5 External roof antenna GSM/GPS
The External roof antenna is used when the presence of an installation does not
need to be hidden. The External roof antenna uses a rubber gasket to provide a
watertight seal. With this antenna it is only necessary to drill one 18mm hole in
the vehicle. The cabling for this antenna terminates with a male SMA connector
for GSM and a female SMC connector for GPS.
need to be hidden. The External roof antenna uses a rubber gasket to provide a
watertight seal. With this antenna it is only necessary to drill one 18mm hole in
the vehicle. The cabling for this antenna terminates with a male SMA connector
for GSM and a female SMC connector for GPS.
Note: In order to comply with FCC RF exposure requirements, the