RACAM - TECH LTD 1014411 ユーザーズマニュアル
Operating the System
30
1.SELECT EVENT
2.PROGRAM EVENT
3.CLEAR EVENT
4.CHOOSE EVENT
2.PROGRAM EVENT
3.CLEAR EVENT
4.CHOOSE EVENT
2.
Select SELECT EVENT from the EVENTS CONTROL screen. The
SELECT EVENT screen will be displayed:
SELECT EVENT
Choose event
from 1 to 8
1
Choose event
from 1 to 8
1
3.
Select the desired event number and press Enter. The EVENTS
CONTROL screen will be displayed again.
4.
From the EVENTS CONTROL screen, select CHOOSE EVENT. The
following screen will be displayed:
1.AUTO
2.S-AUTO
3.MANUAL
2.S-AUTO
3.MANUAL
5.
Select the desired event mode for the selected event number.
6.
Press Esc three times to display the standby screen.
Arm the System
Press the Ready key. The display will count down 7 seconds. During this time the
command LEDs will blink as follows:
Key LED
command LEDs will blink as follows:
Key LED
Color
Send Red
Ready Red
Hold Green
Group Green
After elapsing of the 7 seconds, the command LEDs will blink as follows:
Key LED
Ready Red
Hold Green
Group Green
After elapsing of the 7 seconds, the command LEDs will blink as follows:
Key LED
Color
Send Green
Ready Red
Hold Green
Group Green
This indicates that the TU has sent the arming command to the RCUs. On the RCUs,
the green light will blink. This indicates that the RCUs are in armed state.
Ready Red
Hold Green
Group Green
This indicates that the TU has sent the arming command to the RCUs. On the RCUs,
the green light will blink. This indicates that the RCUs are in armed state.