Vanu Inc. CR-GC-19-02 ユーザーズマニュアル

ページ / 44
. . . . .
Connecting to the Network
 
29
C
ONNECTING
 
TO
 
THE
 N
ETWORK
After installing the CompactRAN GSM/CDMA base station on the pole wall, you 
need to connect the GPS, RX and TX antennas to the CompactRAN GSM/CDMA 
base station (
) and then connect the CompactRAN GSM/CDMA base 
station to the power supply and the network. 
Figure 4-8.   CompactRAN Antenna Connectors
1.  
Connect the TX antenna.
2.  
Connect the RX antenna.
3.  
Connect the GPS antenna.
Caution:  
The antennas should be connected before the Service 
Enclosure is powered on; otherwise, damage may 
result.
4.  
Connect the backhaul using the modem inside the Service Enclosure.
5.  
Connect to the power source.
6.  
Open Service Enclosure and turn on the power switch (
Status LED
TX Antenna
RX Antenna
GPS Antenna