Bron Elektronik AG RFS2216 ユーザーズマニュアル
Attention! Although this radio system allows up to 99 studio addresses, the number of channels that is
effectively available is restricted by the RFS 2 flash unit to be controlled.
For further instructions, please see the operating instructions for the flash unit concerned.
2.
effectively available is restricted by the RFS 2 flash unit to be controlled.
For further instructions, please see the operating instructions for the flash unit concerned.
2.
OPERATION
> Keys
The unit has three menu keys, a scrolling wheel, a "test" key and two slide switches, one for modelling light and
one to switch the unit on and off.
> Duration of key presses
A short press of a key is one that takes less than one second, a long press is longer than one second.
Overview of key functions
Key
Operation
Function executed
Comments
test
Press key briefly
Triggers a test flash
test
Long press of key and
switch unit on
switch unit on
Unit settings (see Chapter 6)
ST
Press key briefly
Opens the studio menu and confirms
the setting Studio Energy
the setting Studio Energy
Turn the scrolling wheel to set
the studio energy
the studio energy
ST
Press key for longer
Opens the studio menu and confirms
the setting Studio
the setting Studio
Turn the scrolling wheel to set
the studio channel
the studio channel
HS
Press key briefly
Opens the HS menu and confirms the
setting
setting
Turn the scrolling wheel to
switch the HS function on or off
switch the HS function on or off
HS
Press key for longer
Opens the HS menu and confirms the
setting HSMA (HS Manual Adjust)
setting HSMA (HS Manual Adjust)
Using the scrolling wheel the
optimum flash triggering point
can be selected manually
optimum flash triggering point
can be selected manually
LP
Press key briefly
Opens the lamp menu and confirms
the setting lamp energy
the setting lamp energy
Turn the scrolling wheel to set
the lamp energy
the lamp energy
LP
Press key briefly again
Changes the lamp channel
Turn the scrolling wheel to set
the energy of the selected lamp
the energy of the selected lamp
LP
Press key for longer
Opens the lamp menu and confirms
the setting Number of lamps
the setting Number of lamps
Turn the scrolling wheel to set
the maximum number of lamps
per studio
the maximum number of lamps
per studio
ON/OFF
Slide
Switches the unit on and off
MODELLING
LIGHT
LIGHT
Slide
Switches the modelling light on or off
Automatic switch off
After 10 minutes, the unit switches automatically to energy-saving mode. Press any key to reactivate the unit.
3.
SETTING STUDIO ADDRESSES
The transceiver must have the same studio address as the flash units used. First set the studio address you
want to use on the flash units, and then synchronise the RFS 2.2 transmitter.