Bron Elektronik AG RFS2216 ユーザーズマニュアル
6.
HS
6.1.
Menu “HS”
The HS mode enables short exposure times (down to 1/8000 s) on the camera in combination with HS-
compatible flash units.
Operating HS functions
-
Mount a camera-compatible RFS 2.2 on the unit
-
Switch on the RFS 2 / HS-compatible broncolor flash unit
-
Activate the RFS function on the flash unit
-
Activate HS mode on the RFS 2.2. The flash unit switches automatically to HS mode
HS on/off: Press the “HS” key briefly. Turn the scrolling wheel up or down. HS mode switches on and off.
Confirm the selection by a short press on key “HS”.
6.2.
Menu "HSMA"
When HS is active, HSMA (HS Manual Adjust) improves the exposure to suit the camera model being used. The
purpose of HSMA mode is to override the automatic HS flash trigger. The automatically calculated shutter release
is cancelled.
The delay of the flash trigger signal (HSMA) depends on the camera, and so is different from model to model.
The transmitters are factory set to work correctly with most models of a given brand, however if you should
notice a black bar across the exposed image you should utilize the HSMA function to adjust the timing until the
black bar is no longer visible in the exposed image.
Longer press on key "HS" for HSMA (HS Manual Adjust): turn the scrolling wheel up or down. In this way HSMA
mode can be set individually. Confirm the selection by a short press on key “HS”.
7.
purpose of HSMA mode is to override the automatic HS flash trigger. The automatically calculated shutter release
is cancelled.
The delay of the flash trigger signal (HSMA) depends on the camera, and so is different from model to model.
The transmitters are factory set to work correctly with most models of a given brand, however if you should
notice a black bar across the exposed image you should utilize the HSMA function to adjust the timing until the
black bar is no longer visible in the exposed image.
Longer press on key "HS" for HSMA (HS Manual Adjust): turn the scrolling wheel up or down. In this way HSMA
mode can be set individually. Confirm the selection by a short press on key “HS”.
7.
UNIT SETTINGS (c.fn)
Operation
-
Switch the RFS 2.2 unit off (slide main switch to "off")
-
Press and hold the "test" key and simultaneously switch on the RFS 2.2 (slide main switch to "on")
-
Turn the scrolling wheel until you reach the desired function
-
Mark the function with the "LP" key (set)
-
Use the scrolling wheel to determine the property
-
Press "LP" to confirm selection (back)
Display
Function
Selection
Description
c.fn-00
transceiver
transmitter
receiver
receiver
Transmitter mode
Receiver mode
Receiver mode
c.fn-01
PC sync
output
input
input
Select sync connection as output or input
When unit is in receiver mode, the PC port
will be automatically set as output
When unit is in transmitter mode, the PC
port will be automatically set as input
When unit is in receiver mode, the PC port
will be automatically set as output
When unit is in transmitter mode, the PC
port will be automatically set as input