GRAUPNER CO. LTD. 16007700 ユーザーズマニュアル

18 / 36

S1036.77_jh_V1_de

Symbols in the display
Telemetry symbols in the display

The active model memory has not yet been bound to a receiver.
Not flashing: RF transmitter function switched off.
Blinking antenna symbol: Last receiver bound to the active 

model memory is inactive or out of reach
No telemetry signal to receive
Signal strength display of the model connection
Signal strength display of the connection with pupil transmitter 

in the teacher transmitter display with wireless connection

Position indicator

Once you activate one of the CTRL dials 5 + 6 in the middle of 

the transmitter upper part, a symbol appears on the left near the 

vertical trim position indicators in the lower display.
Contemporaneously the vertical position indicators change 

during the operation from the trim position to the CTRL dials 5 

+ 6 indicating their actual position.
The left bar shows the position of the left INC/DEC CTRL dial 5 

and the right bar shows the position of the position of the right 

CTRL dial 6 (both horizontal bars show the trim position of the 

related sticks trims).
Approx. 2 seconds after the end of the operation of both but-

tons, the display shows again the actual trim position of the trims 

(elevator/nick and throttle/pitch) of the related sticks.

Key pad
Keys left of the display

 



ESC button

Pressing the ESC button brings about a stepwise return to func-

tion selection or back to the basic display. Any setting changed 

in the meantime is retained.
Momentarily touching the ESC key for about 1 second while in 

the base screen will open and close the Telemetry menu.

 



Selection keys 

Momentarily pressing one of these keys will cause analogous 

paging in the given arrow direction through lists, e. g. through 

the model selection list or the multi-function list or within menus 

though the menu lines.

M

M
P

GRAUBELE

#01

2:22h

S

L

0:00.0

0:00.0

RX0.0V

3.9V

M

HoTT

ESC