GRAUPNER CO. LTD. 16007700 ユーザーズマニュアル

16 / 36

S1036.77_jh_V1_de

Note

Make sure that all the plugs are securely inserted in the respective

sockets, and only use the provided plug-in connections with a 2-pin

jack plug on the DSC side.

In the "Transmitter setting" submenu, you can set one of the

following modes in the "DSC output" line depending on the

number of functions to be transmitted: PPM10, PPM16, PPM18

and PPM24. Default setting: PPM10.

Memory cards

Copmatible memory cards:

micro SD up to 2 GB

micro SDHC up to 32 GB

Our recommendation: For a normal use a memory card with a

storage capacity of up to 4 GB is sufficient.

Inserting and removing the memory card step by step:

Switch off the transmitter.
The memory card slot is located in the left provided connections

of the transmitter.
To insert:
Push the SD card as deep as you need to win the spring resis-

tance of the slot. (contacts upward)
To remove:
Push the SD card slightly toward the card slot to unlock it and

then remove it.

The included memory card is ready for use as soon as the trans-

mitter is switched on. In the display appears the symbol of a

memory card.
Otherwise, folders are created on the memory card ( repre-

sented in the transmitter display by a permanent filling from left

to right memory card). When the animation finishes, the inserted

memory card is ready for use.
You can connect the memory card to your PC by using a mem-

ory card reader. Copy the data downloaded from the transmitter

page on the web site in the related folder of the memory card.

Insert the memory card in your transmitter.

Data recording/Data saving

The data recording in the SD card is linked to the log timer. If it

is started, the data recording starts as well and it stops when

the log timer is stopped.

GRAUBELE

#01

2:22h

«normal »

K78

0:00.0

5.5V

3.9V

HoTT