GRAUPNER CO. LTD. 16007700 ユーザーズマニュアル

22 / 36

S1036.77_jh_V1_de

Sticks conversion
Neutralization

Both control sticks can be set from neutralizing to non-neutral-

izing.

Locate in the left control stick gimbal the screw surrounded by 

a white circle in the picture.
Turn the screw toward the inside of the transmitter until the rel-

evant control stick can move freely from stop to stop, or turn it 

outward until the control stick resets itself independently.

Brake spring and ratchet

The outboard screw of the two marked in the figure adjust the 

braking force.
The inboard screw adjusts the strength of the ratchet for the 

respective control stick.

Control sticks centering force

The control sticks' restoring force can also be adjusted. The 

adjustment is located next to the return springs.
By turning the respective adjust screw the spring force can be 

adjusted.
Right turn = return harder
Left turn = return softer

Length of both control stick can be adjusted. Hold down the 

bottom half of the knurled grip, and loosen the screwed connec-

tion by turning the top part:
You can now lengthen or shorten the control stick by screwing 

it up or down.  Then clamp the top and bottom part of the grip 

by rotating them against each other.
Analogously proceed with the exchange of the short sticks 

against the supplied longer sticks.