GRAUPNER CO. LTD. 16007700 ユーザーズマニュアル

30 / 36

S1036.77_jh_V1_de

The flashing arrows indicate in which direction you have to push 

the sticks.
Confirm by pushing the SET key.
With the selection keys 

 of the right four way keys allow you 

to cyclically select the positions of the four calibrated sticks.
Pushing the ESC key will terminate the process and return to the 

sub-menu "Stick cali.".

Example: Bring here the respective left blinking selection arrow 

of the right stick to the left limit. Tip on the SET key. Push the 

SET key. So the calibration of the right stick left limit. The circle 

in the middle of the stylized stick blinks as confirmation.

Bluetooth initialization

In this display you can initialize an optional Bluetooth module fol-

lowing the manual included in the module package content.

Telemetry data display
Sensors

The upper display serves as graphical representation of the 

telemetry data. 
If a receiver is bound the telemetry display appears. By tipping 

again the selection keys  , you can select which sensor or 

module you want to be displayed.
If instead there are two "X" 

 in the lower part of the display 

and it appears the message "CAN'R RECEIVE ANY DATA", it 

means that there is no connection between receiver and trans-

mitter and that no telemetry data is available. Turn on your 

receiver, or bind a receiver to the active model memory.
Depending on the connected modules and sensors, several 

selectable displays will appear. The description of these displays 

is contained in the manual included in the sensor package.
The transmitter recognizes automatically the sensors. You can 

view the sensors by changing from the main menu to the telem-

etry menu. The sensors will be listed in the display and marked 

with a checkmark.









  HIDDEN MODE