GRAUPNER CO. LTD. 16007812 ユーザーズマニュアル

16 / 28

S1002.PRO_jh_V1

During this waiting time you can also switch the RF module off by 

pushing the  or  button of the left four-way button which move 

the black field, in this way the "ON" is shown normally and "OFF" is 

inverted represented.

Control sticks length adjustment

Length of both control stick can be adjusted. Hold down the bottom 

half of the knurled grip, and loosen the screwed connection by turn-

ing the top part:
You can now lengthen or shorten the control stick by screwing it up 

or down.  Then clamp the top and bottom part of the grip by rotat-

ing them against each other.

Opening/closing the transmitter housing

The transmitter should be opened only in the following cases:

 



If a self centering stick has to be converted in non self centering

 



If a non self centering stick has to be converted in self centering

 



To set the control stick centering force

Before opening the housing switch the transmitter off. 
Open the battery case.
Remove the battery holder lifting it from one side, without forcing 

it, release it from the velcro tape.
Unplug the connector.
Unscrew the eight screws with a crossscrewdriver.
Hold both housing halves with both hands and let the screws fall on 

a proper surface turning the transmitter upside-down.
Rotate the lower half carefully and fold it to the bottom.

Cables connect the lower half of the housing with the upper part 

electronic components. This connection must not be damaged! Do 

not touch the electronic boards.

RF on/off?

ON

Please select

OFF