TP-Link Technologies Co. Ltd. TDW8151N ユーザーズマニュアル

 

 

33

must be identical for all devices in the wireless network. It is case-sensitive and must not 

exceed 32 characters (use any of the characters on the keyboard). Make sure this setting 

is the same for all stations in your wireless network. Type the desired SSID in the space 

provided. 

• 

Authentication Type: Select an authentication type from the drop-down list, which 

allows you to configure security features of the wireless LAN interface. Options available 

are: Disabled, WEP-64Bits, WEP-128Bits, WPA-PSK, WPA2-PSK, and WPA-PSK/ 

WPA2-PSK. 

¾  WDS Settings: Select On/Off to enable/disable WDS. With this function enabled, the Router 

can bridge two or more WLANs. 

• 

MAC Address: Enter the MAC Address you wish to bridge in the field. 

¾  Wireless MAC Address Filter: Wireless access can be filtered by using the MAC addresses 

of the wireless devices transmitting within your network’s RADIUS.   

• 

Active: If you wish to filter users by MAC Address, select “Activated”, and “Deactived” for 
don’t. 

• 

Action: To filter wireless users by MAC Address, select “Allow Association” or “Deny 
Association” the follow Wireless LAN station(s) association. 

• 

MAC Address: Enter the MAC Address you wish to filter in the field. 

Choose “Advanced Setup”, you can see the next submenus: 

 

Figure 4-22 

Click any of them, and you will be able to configure the corresponding function. 

Choose “Advanced Setup→Firewall” menu, and you will see the next screen (shown in Figure 

4-23).  

 

Figure 4-23 

¾  Firewall:  Select this option can automatically detect and block Denial of Service (DoS)