4RF Limited SRN0400025A ユーザーズマニュアル
12 | Getting Started
Aprisa SR User Manual
Phase 3: Establishing the link
1.
If radio’s IP address is not the default IP address (169.254.50.10 with a subnet
mask of 255.255.0.0) and you don’t know the radio’s IP address see ‘Command
Line Interface’ on page 202.
mask of 255.255.0.0) and you don’t know the radio’s IP address see ‘Command
Line Interface’ on page 202.
Page 202
2.
Connect the Ethernet cable between the radio’s Ethernet port and the PC.
3.
Confirm that the PC IP settings are correct for the Ethernet connection:
IP address
Subnet mask
Gateway IP address
Page 61
4.
Open a web browser and login to the radio.
Page 65
5.
Set or confirm the RF characteristics:
TX and RX frequencies
TX output power
Page 85
6.
Compare the actual RSSI to the expected RSSI value (from your path planning).
7.
Align the antennas.
Page 208
8.
Confirm that the radio is operating correctly; the OK, DATA, CPU and RF LEDs
are light green (the AUX LED will be off).
are light green (the AUX LED will be off).