Geonautics International Pte Ltd 30-0710 ユーザーズマニュアル
TAG-T3 Wombat – User Guide, 1.0.7
Commands
4.3.3 Motion
Sets the motion sensitivity of the movement sensor and the interval
that any single movement is valid.
$GO0,,SHK[,<shock>][,<duration>]
$GOA,<Unit_Id>,SHK,<shock>,<duration>
Motion Command
Description
shock
Strength of movement to register motion,
1 to 255 where,
1 to 255 where,
1 being most sensitive
255 being the least sensitive
duration
Number of seconds the motion is valid for
from the last movement
from the last movement
Table 6, Motion Command
Default:
$GO0,,SHK,30,90
Example:
$GO0,,SHK,20,120
Returns:
$GOA,<Unit_Id>,SHK,20,120
The shock duration should be set longer than the least time we would
expect to see a motion trigger. The duration should be large enough to
allow for stationary times at traffic lights and other periods of
inactivity.
If shock is set to zero (0), the motion sensor will be disabled. Only
experienced users should consider using this option.
© Geonautics
22
Law Enforcement ONLY