NEC Nederland B.V. AP300E-001 ユーザーズマニュアル
March 2010
AP300 Customer Engineer Manual
5
All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner
If the G.729 Daughter Board is not installed, the AP300 supports only G.711u law or
G.711a law.
Installation of the Daughter Board is described in chapter 4. MOUNTING THE G.729
DAUGHTERBOARD.
1.7.
G.711a law.
Installation of the Daughter Board is described in chapter 4. MOUNTING THE G.729
DAUGHTERBOARD.
1.7.
VISUAL CHECK
The equipment must be carefully unpacked and examined for any visible sign of damage.
Anything not in order should be reported back to the supplier, as soon as possible, to avoid
delays during installing due to missing equipment.
1.8.
Anything not in order should be reported back to the supplier, as soon as possible, to avoid
delays during installing due to missing equipment.
1.8.
HORIZONTAL OR VERTICAL MOUNTING
The AP300 can be mounted horizontally or vertically. When mounting vertically, you don’t
need top change the antenna position.
need top change the antenna position.
Figure 1. AP300 in vertical position.
When the AP300 must be mounted horizontally, the antenna position must be changed.