Accton Wireless Broadband Corp. FIU176205000W ユーザーズマニュアル

Introduction

1-4

*

Slow blinking is an on-off cycle of once every 2 seconds. 

**Fast blinking is an on-off cycle of once of every 0.5 seconds.

***Untra Fast flashing: on-off cycle of once of every 0.2 seconds

The wireless AP/Router has the following RJ-45 ports:
• The four RJ-45 LAN ports are for connections to PCs or to a 10/100 Mbps network 

switch. 

• The RJ-45 WAN port is for connection to a DSL or cable modem, or to a LAN or 

other device that provides your Internet access.

All RJ-45 ports auto-negotiate the operating speed to 10/100 Mbps, the mode to 
half/full duplex, and the pin signals to MDI/MDI-X. Automatic MDI/MDI-X support 
enables you to use straight-through cables for all network connections to PCs, 
switches, or hubs.

The 3G Modem USB Port supports connection to a wireless cellular 3G or 3.5G  
modem for broadband internet access.

The wireless AP/Router does not have a power switch. It is powered on when 
connected to the AC power adapter, and the power adapter is connected to a power 
source. The power adapter automatically adjusts to any voltage between 100-240 
volts at 50 or 60 Hz. No voltage range settings are required.

The Reset button can be used to restart the wireless AP/Router or restore the 
factory default configuration. If you press the button for less than 5 seconds, the 
wireless AP/Router will restart. If you press and hold down the button for 5 seconds 
or more, any configuration changes you may have made are removed and the 
wireless AP/Router is restored to its factory default configuration. 

Ultra Fast Flashing 

Green**

Indicates that 3G usage is already over the ISP supplied limit.

Ultra Fast Flashing 

Green and OFF 

cycle every 5 

seconds**

Indicates that 3G usage is already over the user defined pre-warning 

limit.

Slow Flashing Green Indicates that the 3G/3.5G USB modem is in the process of connecting.
Off

Indicates that there is no connection or no attached 3G/3.5G device.