Accton Wireless Broadband Corp. FIU176205000W ユーザーズマニュアル

Installation

2-2

To connect the wireless AP/Router in Gateway Mode for use as an Internet gateway, 
follow these steps:

1.

Connect an Ethernet cable from the wireless AP/Router’s WAN port to your 
Internet connected cable or ADSL modem.

2.

Connect an Ethernet cable from the wireless AP/Router’s LAN port to your PC. 
Alternatively, you can connect to a workgroup switch to support multiple users. 
The wireless AP/Router can support up to 253 wired and wireless users.

3.

Power on the wireless AP/Router by connecting the AC power adapter and 
plugging it into a power source.

Caution: Use ONLY the power adapter supplied with the wireless AP/Router. Otherwise, 

the product may be damaged.

When you power on the wireless AP/Router, verify that the Power LED turns on 
and that the other LED indicators start functioning as described under “LED 
Indicators” on page 1-3.

4.

Set up wireless devices by pressing the WPS button on the wireless AP/Router 
or by using the web interface. See “Initial Configuration” on page 4-1 for more 
information on accessing the web interface.

In Bridge Mode, the wireless AP/Router operates as a wireless access point, 
extending a local wired network to associated wireless clients (PCs or notebooks 
with wireless capability). From any nearby location, you can then make a wireless 
connection to the wireless AP/Router and access the wired network resources, 
including local servers and the Internet.

In Bridge Mode, the wireless AP/Router does not support gateway functions on its 
WAN port. Both the LAN port and the WAN ports can be connected to a local 
Ethernet LAN. 

Note: Bridge Mode is not the factory default mode and must be manually set using the 

web management interface.