Accton Wireless Broadband Corp. FIU176205000W ユーザーズマニュアル
Bridge Mode
2-3
2
Figure 2-2. Bridge Mode Connection
To connect the wireless AP/Router for use as an access point, follow these steps:
1.
Using Ethernet cable connect the wireless AP/Router’s LAN and WAN ports to
PCs or a LAN switch.
PCs or a LAN switch.
2.
Power on the wireless AP/Router by connecting the AC power adapter and
plugging it into a power source.
plugging it into a power source.
Caution: Use ONLY the power adapter supplied with the wireless AP/Router. Otherwise,
the product may be damaged.
When you power on the wireless AP/Router, verify that the Power LED turns on
and that the other LED indicators start functioning as described under “LED
Indicators” on page 1-3.
and that the other LED indicators start functioning as described under “LED
Indicators” on page 1-3.
3.
Set up wireless devices by pressing the WPS button on the wireless AP/Router
or by using the web interface. See “Initial Configuration” on page 4-1 for more
information on accessing the web interface.
or by using the web interface. See “Initial Configuration” on page 4-1 for more
information on accessing the web interface.
3.
Set up wireless
devices
devices
Notebook PC
2.
Connect LAN port
to PC
to PC
2.
Connect AC power
adapter to
power source
adapter to
power source
1.
Connect LAN and WAN
ports to an Ethernet LAN
switch or PCs
ports to an Ethernet LAN
switch or PCs