Accton Wireless Broadband Corp. FIU176205T01W ユーザーズマニュアル
C
HAPTER
4
| Initial Configuration
Setup Wizard
– 42 –
S
TEP
3 - WAN
S
ETTINGS
- DHCP
The Step 3 page of the Wizard specifies the Internet connection
parameters for the Wireless Broadband Router’s WAN port. Click Next after
completing the setup.
By default, the access point WAN port is configured with DHCP enabled.
The options are Static IP, DHCP, PPPoE (ADSL), and PPTP. Each option
changes the parameters that are displayed on the page. (Default: DHCP)
Figure 14: Wizard Step 3 - WAN Settings - DHCP
The following items are displayed on this page:
◆
WAN Connection Type — Select the connection type for the WAN port
from the drop down list. (Default: DHCP)
◆
DHCP Mode — Specifies the hostname of the DHCP client.
(Default: SMCWBR14S-N4)
◆
MAC Clone — Some ISPs limit Internet connections to a specified MAC
address of one PC, which is registered with the ISP. This setting allows
you to manually change the MAC address of the Wireless Broadband
Router's WAN interface to match the PC's MAC address provided to your
ISP for registration. You can enter the registered MAC address manually
by typing it in the boxes provided. Otherwise, connect only the PC with
the registered MAC address to the Wireless Broadband Router, then
click the “Clone your PC’s MAC Address”. (Default: Disabled)
N
OTE
:
If you are unsure of the PC MAC address originally registered by
your ISP, call your ISP and request to register a new MAC address for your
account. Register the default MAC address of the Wireless Broadband
Router.