Accton Wireless Broadband Corp. FIU176205T01W ユーザーズマニュアル
C
HAPTER
4
| Initial Configuration
Setup Wizard
– 43 –
S
TEP
3 - WAN
S
ETTINGS
- S
TATIC
IP
Configures a static IP for the WAN port.
Figure 15: Wizard Step 3 - WAN Settings - Static IP
The following items are displayed on this page:
◆
WAN Connection Type — Select the connection type for the WAN port
from the drop down list. (Default: DHCP)
◆
IP Address — The IP address of the Wireless Broadband Router. Valid
IP addresses consist of four decimal numbers, 0 to 255, separated by
periods.
◆
Subnet Mask — The mask that identifies the host address bits used for
routing to specific subnets.
◆
Default Gateway — The IP address of the gateway router for the
Wireless Broadband Router, which is used if the requested destination
address is not on the local subnet.
◆
Primary DNS Server — The IP address of the Primary Domain Name
Server. A DNS maps numerical IP addresses to domain names and can
be used to identify network hosts by familiar names instead of the IP
addresses. To specify a DNS server, type the IP addresses in the text
field provided. Otherwise, leave the text field blank.
◆
Secondary DNS Server — The IP address of the Secondary Domain
Name Server.
◆
MAC Clone — Some ISPs limit Internet connections to a specified MAC
address. This setting allows you to manually change the MAC address
of the Wireless Broadband Router's WAN interface to match the PC's
MAC address provided to your ISP for registration. You can enter the
registered MAC address manually by typing it in the boxes provided.
Otherwise, connect only the PC with the registered MAC address to the
Wireless Broadband Router, then click the “Clone your PC’s MAC
Address” (Default: Disable)