SmartSight Networks Inc MF24 ユーザーズマニュアル
25
_____________________________________________________________________________________________
Microflex AV/ADV/AVr/ADVr North-American user’s manual / Rev 1.4
running applications (figure 2). When all applications are closed continue setup by
clicking on <Next>.
Read carefully the Release Note and then press <Next>.
The installation will start and install MNM to the default path C:\Program Files\MNM\.
Once completed, you will be asked to restart your computer, choose Yes and click
on <Finish>(figure 3).
clicking on <Next>.
Read carefully the Release Note and then press <Next>.
The installation will start and install MNM to the default path C:\Program Files\MNM\.
Once completed, you will be asked to restart your computer, choose Yes and click
on <Finish>(figure 3).
Figure 12 – Setup Complete Dialog Box
4.2 Using Multisite Network Manager (MNM)
The MNM is designed to configure a Network. It can also be used to configure each
module individually before installing the network.
4.2.1 Launching the MNM Programmer
Launch Windows 95/98TM.
Connect the COMM Port used by the PC to one of the unit in the network. The
connection must be done on the Data Port #1.
connection must be done on the Data Port #1.
____________________________________________________________________________
If you have ordered RS-485 signal level for Pan-Tilt-Zoom support, you will need a signal
converter plug-in module to convert the RS-485 signals to RS-232 signals for
communication with the computer on DATA 1.
If you have ordered RS-485 signal level for Pan-Tilt-Zoom support, you will need a signal
converter plug-in module to convert the RS-485 signals to RS-232 signals for
communication with the computer on DATA 1.
____________________________________________________________________________
From the taskbar select Start | Programs | MNM.