SmartSight Networks Inc MF24 ユーザーズマニュアル
27
_____________________________________________________________________________________________
Microflex AV/ADV/AVr/ADVr North-American user’s manual / Rev 1.4
____________________________________________________________________________
MNM may not work properly if two (2) or more Microflex are set in Master mode. There
must be a single Microflex set in master mode before using MNM.
must be a single Microflex set in master mode before using MNM.
____________________________________________________________________________
4.3 Main Operations
Only two simple operations are needed to configure a Multisite network: the
configuration download and the configuration upload.
The configuration download retrieves all the properties of each unit in the network.
All information is stored in a database and displayed to the user. Some
configurations are read-only and some others are read-write. To meet the
specifications of your application, you may modify the read-write properties as
required. Once the configuration is completed, the upload operation will send the
new configuration to each unit and save it permanently.
The MNM main window is divided into four distinct areas (figure 15): the menu bar,
the tool bar, the network list and the property tabs. Each of these parts is described
in the following sections.
Figure 15 – MNM Main view sections
Network
List
Property
Tabs
Tool Bar
Menu Bar