SmartSight Networks Inc MF24 ユーザーズマニュアル
33
_____________________________________________________________________________________________
Microflex AV/ADV/AVr/ADVr North-American user’s manual / Rev 1.4
with one (1) stop bit on their data ports.
___________________________________________________________________
___________________________________________________________________
4.4.4 Radio
• Selection (read-write)
NONE if no radio is present
RADIO 1 (INTERNAL) if one radio is present
• Status (read-only)
Not Detected if no radio is present
Detected if one radio is present
• Frequency (read-write)
Frequencies can be selected from the drop-down list or can be entered manually.
Frequency range is 2405 - 2484 MHz.
• PN code (read-write)
PN code can be selected from the drop-down list. Depending of the Bit Rate
selected the PN code list will change.
selected the PN code list will change.
• Security code (read-write)
The Security code is a 4 characters Hexadecimal number (16 bit) , a value
between 0000 and FFFF must be assigned. The security code must be set to the
same value for all Multisite modules in a single network.
between 0000 and FFFF must be assigned. The security code must be set to the
same value for all Multisite modules in a single network.
• Power (read-write)
You can select the radio output power from the provided drop-down list.
• Bit Rate (read-write)
You can select the radio bite rate from the provided drop-down list.
• RSSI Mode (read-write)
Select the appropriate RSSI display mode from the drop-down list:
MODE 1: Continuous RSSI
MODE 2: RSSI on valid receptions only
MODE 3: Continuous RSSI with maximum hold
MODE 4: RSSI on valid receptions with maximum hold
(ALWAYS SELECT MODE 2 under normal operation.)
• RSSI (read-only)
The value of the RSSI (Receive Signal Strength Indicator) when the “Download”
command was executed.
command was executed.