SmartSight Networks Inc MF24 ユーザーズマニュアル
44
_____________________________________________________________________________________________
_____________________________________________________________________________________________
ITEMS SUPPORTED
Camera number
Select the camera you want to configure. Press the <OPEN> key and select a
camera number. To select a camera, enter the camera ID number, then the
<CAM> key (<1>,<CAM> for camera 1).
camera number. To select a camera, enter the camera ID number, then the
<CAM> key (<1>,<CAM> for camera 1).
Camera title
Modify the title for the selected camera. Press the <OPEN> key, then select
characters for your title. To select characters, move the joystick up and down. To
switch between characters move the joystick left and right.
characters for your title. To select characters, move the joystick up and down. To
switch between characters move the joystick left and right.
Reset values to default
Reset title to default.
Exit
Return to the Basic Setup menu.
Help Menu
The Help menu is accessed from the Basic Set-up menu. Use the joystick to
select HELP. Press the <OPEN> key. The HELP menu appears
select HELP. Press the <OPEN> key. The HELP menu appears
5.6 Pan, tilt and zoom functionality
The keyboard allows the user to operate a PTZ controller which supports Pelco’s D
protocol. To connect the camera to the Microflex video transmitter (MF24-AV,
MF24-ADV), follow this table.
protocol. To connect the camera to the Microflex video transmitter (MF24-AV,
MF24-ADV), follow this table.
PTZ Controller Signals (DTE)
Microflex Transmitter (DCE)
Interconnect Board (JP17)
1
TX+ (optional)
Pin 1:
TX+
TX- (optional)
Pin 2:
TX-
GND Pin
5:
GND
RX+
Pin 3:
RX+
RX- Pin
4:
RX-
1
DATA1 on the interconnect board of the MF24-AV/ADV is referred to as JP17. Note that
on both interconnect board models, Pins 1-5 are counted from left to right.