Xeline Co. LTd. SU-200B ユーザーズマニュアル
This document is subject to change without prior notice.
11
③
Connect the other end of the RJ-45 cable into the subscriber’s PC Network Interface
Card.
Figure 7 Connecting the SU-200B to the Subscriber’s PC
④
Turn on the power of the SU-200B and check if the LAN LED is activated.
⑤
The SU-200B is remotely configured by the EU-200B through automatic process.
Therefore there is no need to manually configure the SU-200B
.
⑥
Wait approximately 1 minute for the EU-200B to finish the remote configuration
process.
1
The EU-200B configures the Group ID and operation mode of the SU-200B during the remote
configuration process. Please refer to the EU-200B Installation Guide for more details.