Arescom Inc. AG2560 ユーザーズマニュアル
10
June, 2002
AG2500Series Software User’s Guide
3. Verify your PC’s IP address:
It MUST be 192.168.10.X (where X is in the range of 2-254). To verify your PC’s IP address, please
follow the instructions below:
follow the instructions below:
For Windows 95/98/ME users:
Step 1. Click Start -> Run.
Step 2. Enter winipcfg and click OK to prompt the IP Configuration window.
Step 3. Select the correct Ethernet or Wireless networking adapter in the white dropdown box.
Step 4. If the IP address displayed in the IP Address box is not 192.168.10.X. (where X is in the range of 2-
254), you need to click Release All -> Renew All buttons to have the correct IP address assigned from
your AG2000 to your PC.
your AG2000 to your PC.
For Windows 2000/XP users:
Step 1. Click Start -> Run.
Step 2. Enter command and click OK to prompt the Windows DOS window.
Step 3. Enter ipconfig and click OK. Windows will display the Windows IP Configuration information.
Step 4. If the IP address displayed in the IP Address field is not 192.168.10.X. (where X is in the range of 2-
254), you need to enter ipconfig /release and then ipconfig /renew commands to receive a correct IP
address from the AG2000.
address from the AG2000.
4. Verify your PC’s Internet Properties setting if you were previously using an analog
modem.
Please follow the steps below:
Step 1. Click Start, point to Settings, and then click Control Panel.
Step 2. Double-click Internet Options, and then click the Connections tab.
Step 3. Click Never dial a connection, click Apply, and then click OK.