Arescom Inc. AG2560 ユーザーズマニュアル
Basic - SETUP
12
June, 2002
AG2500Series Software User’s Guide
4.2 Basic - SETUP
Figure 4.1
SETUP Page
Consult your ISP and use the SETUP page to configure AresGate’s ATMPVC WAN interface.
Encapsulation:
Allows you to choose the following encapsulation types at the ATM interface:
a.
Not in Use
b.
SNAP/IP
c.
PPPoA VC MUX
d.
PPPoA LLC
e.
PPPoE
f.
SNAP/Bridge
g.
Bridge Routing
VPI:
A virtual path is a semi-permanent connection between endpoints in an ATM
network and may support one or more virtual channels. In Private Virtual
Circuit (PVC) mode, the Virtual Path Identifier (VPI), which is a header
subfield, is assigned manually when ADSL Bridge is used. Different VPI
values allow the endpoints to discriminate between different virtual
connections between ATM nodes.
The minimum and maximum values of the VPI are 0 and 255, respectively. At
default, VPI is set to 0.
network and may support one or more virtual channels. In Private Virtual
Circuit (PVC) mode, the Virtual Path Identifier (VPI), which is a header
subfield, is assigned manually when ADSL Bridge is used. Different VPI
values allow the endpoints to discriminate between different virtual
connections between ATM nodes.
The minimum and maximum values of the VPI are 0 and 255, respectively. At
default, VPI is set to 0.
VCI:
Each connection in an ATM network is characterized by a Virtual Channel
Identifier (VCI). This is a header subfield that is assigned manually when
ADSL Bridge is used. A VCI has only local significance on the link between
ATM nodes. When the connection is released, the VCI value on the involved
links will be released and can be reused by other connections.
The minimum and maximum values of the VCI are 32 and 4095, respectively.
At default, VCI is set to 0.
Identifier (VCI). This is a header subfield that is assigned manually when
ADSL Bridge is used. A VCI has only local significance on the link between
ATM nodes. When the connection is released, the VCI value on the involved
links will be released and can be reused by other connections.
The minimum and maximum values of the VCI are 32 and 4095, respectively.
At default, VCI is set to 0.
PPP User Name:
The name of the Internet account provided by your ISP.
PPP Password:
The password you use to access your ISP account.
OAM F5 Timer:
The Operations and Maintenance (OAM) F5 Timer feature transmits
loopback cells to the remote peer according to the specified period. Note that
the local peer will always respond to a loopback cell that is transmitted by the
remote peer. If the OAM F5 timer is set to 0, then no loopback cell will be sent
to the remote peer.
loopback cells to the remote peer according to the specified period. Note that
the local peer will always respond to a loopback cell that is transmitted by the
remote peer. If the OAM F5 timer is set to 0, then no loopback cell will be sent
to the remote peer.