Arescom Inc. ND1760 ユーザーズマニュアル
SOFTWARE INSTALLATION & CONFIGURATION
16
NetDSL 1700 Version 5.2 Get Started User’s Guide
Configuring TCP/IP in Windows
®
NT
Step 1. From the Protocols tab, select TCP/IP Protocol listed under
Network Protocol and click Properties.
Step 2. Select the IP Address tab.
You now have the option of using either dynamic or static IP
addressing.
addressing.
To enable dynamic IP addressing:
Step 1. Click the radio button next
to Obtain an IP Address
from DHCP Server.
from DHCP Server.
OPTIONAL: Click the DNS tab and
select Disable DNS. If you
previously entered any parameters,
clear all pre-existing settings.*
select Disable DNS. If you
previously entered any parameters,
clear all pre-existing settings.*
Step 2. Click OK to exit Network
* If specifically required by
your ISP or remote server,
you may need to enter DNS
information.
you may need to enter DNS
information.
To enable static addressing:
Step 1. Click the radio button next to Specify an IP Address and enter
the IP Address and Subnet Mask (for your PC).
Step 2. Click the DNS tab. Enter the Host and Domain names, and DNS
Service Search Order (for your LAN).
Step 3. Click OK to exit Network Properties window. Proceed to the next
section titled “
.”