Arescom Inc. ND1760 ユーザーズマニュアル

SOFTWARE INSTALLATION & CONFIGURATION

Installing TCP/IP in Windows

NOTE:

Consult your Network Administrator if you do not have

authorization to change settings for your PC.

Step 1. From the Protocols tab

click Add.

Step 2. Select TCP/IP Protocol

and click OK.

Step 3. Check to verify that

TCP/IP Protocol is listed
under Network
Protocols, then click
OK.
A. If you do not see

TCP/IP listed under
Network Protocols, you have not installed TCP/IP. Repeat
steps 1 - 3.

B. If you see TCP/IP listed under Network Protocols, then you

have successfully installed TCP/IP. Proceed to the section
titled “