Honeywell International Inc. WFSLCDUI ユーザーズマニュアル

62

PRELIMINARY: Firelite Wireless Sensor Network P/N LS10036-000FL-E:N0  10/10/2013

Devices

NOTE: To assign a profile, the device must be in a factory default state. A single red light flashes 
on the LED confirming that the device is in the default state. To restore the device to factory 
default state, refer to 4.6.4, "Restoring a Device to Factory Default".

To assign a profile to the device using the PC Tools application, do the following:

1.

Connect the W-USB dongle device to your computer. For more information on USB dongle, 
refer to Section 5:, "USB Adapter".

2.

Launch the PC tools application.  Refer to Appendix B:, "PC tools" to know about launching 
the PC tools application.

3.

Go to the Create Mesh Network step.

4.

Create a new profile or import an existing profile as required. 

5.

Select and open the profile to be assigned to the device from the Name drop down list in the 
left panel.

6.

Switch on the device in range of the USB adapter, which is connected to the laptop or PC 
where PC tool is installed.

7.

Select the device from the Communicator panel.

8.

Click Assign.

The device is now included in the list of devices with a profile assigned.  When the profile is 
assigned, the LEDs emit a solid green light for 10 seconds.