IKUSI ELECTRONICA S.L. RAD-TF ユーザーズマニュアル
3 SAFETY PRECAUTIONS
These instructions must be read carefully in order to install and use the set
properly and to keep it in perfect working condition and to reduce the risks of
misuse.
Do not use this set on machines for the lifting of persons or in potentially explosive
atmospheres.
Any use other than that specified in this manual is dangerous. The following
instructions must be strictly adhered to.
Important note: To comply with FCC RF exposure compliance requirements, this
device and its antenna must not be co-located or operating in conjunction with any
other antenna or transmitter.
properly and to keep it in perfect working condition and to reduce the risks of
misuse.
Do not use this set on machines for the lifting of persons or in potentially explosive
atmospheres.
Any use other than that specified in this manual is dangerous. The following
instructions must be strictly adhered to.
Important note: To comply with FCC RF exposure compliance requirements, this
device and its antenna must not be co-located or operating in conjunction with any
other antenna or transmitter.
WARNING:
Modifications to this equipment are expressly forbidden by the FCC Rules.
Electrical or mechanical changes made to this device may cause harmful radio
interference, and may void the user's authority to operate the equipment
Modifications to this equipment are expressly forbidden by the FCC Rules.
Electrical or mechanical changes made to this device may cause harmful radio
interference, and may void the user's authority to operate the equipment
3.1 What you must do
Strictly adhere to the instructions for installation contained in this manual
Make sure that the installation is carried out by professional and competent personnel.
Ensure that all site and prevailing safety regulations are fully respected.
Make sure that this manual is permanently available to the operator and maintenance
Make sure that the installation is carried out by professional and competent personnel.
Ensure that all site and prevailing safety regulations are fully respected.
Make sure that this manual is permanently available to the operator and maintenance
personnel.
Keep the transmitter out of reach of unauthorised personnel.
Remove the transmission key when the set is not in use.
On starting each working day, check to make sure that the STOP button and other
Remove the transmission key when the set is not in use.
On starting each working day, check to make sure that the STOP button and other
safety measures are working.
When in doubt, press the STOP button.
Whenever several sets have been installed, make sure the transmitter you are going to
Whenever several sets have been installed, make sure the transmitter you are going to
use is the right one. Identify the machine controlled on the label for this purpose on the
transmitter.
transmitter.
Service the equipment periodically.
When carrying out repairs, only use spare parts supplied by the manufacturers dealers.
Use only battery pack BT06K 4.8V 600mAh.
When carrying out repairs, only use spare parts supplied by the manufacturers dealers.
Use only battery pack BT06K 4.8V 600mAh.
3.2 What you must not do
Never make any changes to the set, which have not been studied and approved by the
manufacturer.
Never power the equipment other than with the specified power supply.
RADS11 and RADF13 Users Manual ver0.4a.doc
KCI Hoists Corp. reserves the right to modify this information without prior notification.
KCI Hoists Corp. reserves the right to modify this information without prior notification.
Page 5 of 23