Wilson Electronics LLC 460005 ユーザーズマニュアル

ENGLISH

Before you install your Connect 3G and 

start enjoying improved cellular reception in 

your facility, please do the following: 
1.   Read through all the installation steps. 

This will help you know what to expect 

from start to finish. 

2.   Watch the YouTube video 

demonstrating the Connect 3G 

installation at weboost.com/us/

Connect3Gvideo.

3.   Familiarize yourself with all materials 

in your product package. This will 

allow you to know which pieces are 

referenced in the instructions. 

4.   Identify the location of your best 

available cellular signal. See 

instructions that follow. 

5.   Determine the best installation 

locations for your Outside Antenna, 

Signal Boost, and Inside Antenna. 

Test the function of your Connect 3G 

system before finalizing installation.

Wall Mount Bracket

Omni Antenna Mount Bracket

AC Power Supply

6V / 2.5A

(Not included with some models)

Panel Antenna Kit

Inside Panel Antenna

30’ RG6 coax cable

Outside Antenna Kit

20’ RG6 coax cable

(depending on your particular installation, you will need the following tools)
 

1.  Pole mount - 10 mm open-end wrench or adjustable wrench 

 

2.  Wall mount or Rafter mount - Drill and 3/16 inch bit, Phillips-head screwdriver

Before you install your Connect 3G signal 

booster, you must determine the location of 

the best available cellular signal. This will 

affect the location of your Outside Antenna 

and will help you get the best performance 

from your Connect 3G. You can find the 

strongest signal outside your building, 

typically at the highest point available, using 

any of the following methods: 
1. 

 Best  method: 

 

 Connect the Outside Antenna to the 

Connect 3G signal booster, and the 

Connect 3G to the Inside Antenna. 

Have one person outside (on the roof for 

best results) move the Outside Antenna 

with a second person inside the building 

near the Inside Antenna watching the 

signal strength on a phone. This allows 

you to read the signal strength from 

nearby cell towers. 

 

a.  The person inside should have the 

phone in test mode so the numerical 

signal strength can be read. This 

is more accurate than the bar 

indicator. Go to 

Connect 3G